Is The Dodge 4.7 A Good Engine?

In this blog post, we’re going to look at the Dodge 4.7 V8 engine and see if it’s a good engine or not. First off, the 4.7 is hardly one of the most powerful engines you’ll come across – by today’s standards they don’t really hold up all that well either. Especially when you consider that first-generation version where they only make 245 horsepower. For comparison, take a look at an early 2000s Dodge Ram 1500 with a 5.7L Hemi V8 and compare their 345 horsepower output against 245 hp from the old 4.7-liter motor.

In short, the Dodge Ram 1500’s engine is a much better choice for most people. The downside to it though is that this early model can be harder to find and more expensive than its counterpart from 2006 or 2007 onward. Another thing worth mentioning about the new models of the RAM Truck with a Hemi V-eight motor: they’re not available in many different configurations like you would expect if you were looking at something less powerful – such as four by fours, extended cabs etcetera.

So what do we think? Is this an okay engine or should Dodge put together another version of it? Let us know what your thoughts are in the comment section below! We’ll see you next time when we look back on the different generations of the Dodge Ram 1500 and see what they’re like.

Is the Dodge-4.7 a Good Engine? Chrysler, Dodge, and Jeep 4.7L PowerTech Motor Performance numbers may not seem great by modern standards but the V8 was very strong for its age. However – as with all engines – the Chrysler 4.7L PowerTech is prone to some common faults and failures.

The mill’s horsepower was just 235. Mopar enthusiasts are calling the new 4.7 “Semi Hemi” because the improvements are derived from mechanical features from the 5.7-liter Hemi. There is no harm in comparing them, as neither has hemispherical chambers. Is Dodge Ram 4.7 a reliable engine? It is still a great V8. Although it doesn’t have nearly the horsepower and torque of the Hemi and doesn’t get much better gas mileage, it is still very powerful. The 4.7 seems to be very resilient and can withstand a lot. The next question is: How much horsepower does the 4.7 v8 have. It has single overhead camshafts in each head. It originally produced 235 hp and 295 lb-ft of torque. The 4.7L V8 is available with a five-speed automatic transmission, a five-speed automatic transmission, and a manual transmission. Chrysler 4.7 Liter Next Generation/Corsair V8 engines. For the model year 2008, Chrysler took lessons from the 5.7-Hemi and made the 4.7-liter V8 more powerful. Power went up from 230 to 290 horsepower; gas mileage went up and the vibration went down.

Is RAM capable of making a 4.7 Hemi?

Tim McQuade. From 1999 to 2013, Chrysler produced the 4.7-liter liquid-cooled gasoline engine, also known as the Powertech. It was used from 1999 to 2013 in Chrysler, Dodge, Jeep, and Chrysler vehicles, including the Chrysler Aspen and Dodge Dakota; Ram, Durango and Nitro; and Jeep Grand Cherokee Liberty and Commander; and Mitsubishi Raider.

What horsepower does a 4.7L have?

4.7 HO. A “High-Output” version of the 4.7 L PowerTech engine, producing 265 hp (198 kW) and 330 lb-ft (447 N⋅m) of torque, was introduced in 2002, first appearing in the Jeep Grand Cherokee Limited as an option and the Jeep Grand Cherokee Overland as standard equipment.

What horsepower does a Dodge Motor with a 4.7-liter engine have?

265 hp

Is a Dodge Hemi a Dodge 4.7?

The 5.7-liter Hemi is the bigger displacement of the two. The 4.7-liter has its benefits, with slightly better gas mileage but generally a lower retail price. The 5.7 Hemi engine is significantly more powerful and torque than a Ram equipped with a 4.7 engine. However, they are typically less expensive.

How powerful is a 4.7 Dodge engine?

The First Generation of Dodge 4.7 Engine Specifications: The bore by the stroke of this engine is 3.66 inches by 3.4 inches. The compression ratio is 9.5-1. This engine’s maximum speed is 6,000 RPM. The top horsepower is 235 at 4600 pm.

What horsepower does a Dodge Dodge 4.7-liter V8 have

The 2009 Dodge Ram’s middle engine, the 4.7-liter V8, has 310 horsepower and 330 pounds of torque. The engine has such long-lasting power, it offers great gas mileage. You might also like to take a look at the third engine in the Dodge 2009 Ram.

What horsepower does the 4.7 Hemi have

The First Generation of Dodge 4.7 Engine Specifications: The bore by the stroke of this engine is 3.66 inches by 3.4 inches. The compression ratio is 9.5-1. The first-generation engine can reach a maximum speed of 6,000 rpm. The top horsepower is 235 at 4600 RPM.

What is a Dodge 4.7 engine?

The eight-cylinder Dodge Chrysler 4.7L V8 PowerTech gasoline engine is the Dodge Chrysler 4.7L. It was the engine that powered the 1999 Jeep Grand Cherokee. The engine was later installed in several Dodge vehicles including the Dodge Dakota and Ram.

Is Dodge’s 4.7-liter V8 a good engine for the job?

The 4.7L PowerTech V8 PowerTech is a good engine with a simple, reliable design. It has a strong, cast-iron bedplate and block, as well as a reliable timing chain and electronic systems that are minimally susceptible to failure.

Is Dodge able to make a 4.7 Hemi?

The Dodge Ram 1500 had the longest run-time with the PowerTech V8 (4.7L) engine, up to the 2013 model year. Chrysler replaced the 4.7-liter V8 engine with a more advanced, innovative 3.6 V6 Pentastar engine and modern HemiV8 engines.

How many HP does a Magnum 4.7 have?

4.7 HO. A “High-Output” version of the 4.7 L PowerTech engine, producing 265 hp (198 kW) and 330 lb-ft (447 N⋅m) of torque, was introduced in 2002, first appearing in the Jeep Grand Cherokee Limited as an option and the Jeep Grand Cherokee Overland as standard equipment.

Is the Dodge Dodge-4.7 a V8 engine?

The eight-cylinder Dodge Chrysler 4.7L V8 PowerTech gasoline engine is the Dodge Chrysler 4.7L. It was the engine that powered the 1999 Jeep Grand Cherokee. It was then installed in many Dodge vehicles, including the Dodge Dakota, Ram, and Durango.

Is a 4.7 V8 considered a Hemi?

The Dodge Ram 1500 had the longest run-time with the PowerTech V8 (4.7L) engine, up to the 2013 model year. Chrysler replaced the 4.7-liter V8 engine with a more advanced, innovative 3.6 V6 Pentastar engine and modern HemiV8 engines.

Is the 4.7 Hemi?

The 5.7-liter Hemi is the bigger displacement of the two. The 4.7-liter engine has its advantages, including slightly better gas mileage and a lower retail price. The 5.7 Hemi engine is significantly more powerful and torque than a Ram equipped with a 4.7 engine. However, they are typically less expensive.

Is the Dodge Chrysler 4.7 a Hemi?

Chrysler replaced the 4.7-liter V8 engine with a more innovative, technical 3.6 V6 Pentastar V8 engine and modern Hemi V8 engines.

How much horsepower does a Dodge Motor have at 4.7 liters?

265 hp

Is the Dodge-4.7 a good engine?

Chrysler, Dodge, and Jeep 4.7L PowerTech Motor Performance numbers may not seem great by modern standards but the V8 was very strong for its age. However – as with all engines – the Chrysler 4.7L PowerTech is prone to some common faults and failures.

Who makes the 4.7 Dodge motor?

Chrysler PowerTech